The Company Is Well-Known
Dining Service
Three piece acacia wood display platter set with graduated heights, A frame stand legs and a wavy scalloped edge, for presenting canapes fruit pastries and desserts on party buffets wedding tables and kitchen counters, custom size and logo accepted, carton packed for wholesale.
Three Tier Wooden Display Platters

Product Brief Description
1. Acacia Grain And Wavy Rim
Each display platter is cut from solid acacia, a dense wood with a warm brown base and a strong light and dark band through the grain. The rim is routed into a soft wave that lifts slightly at the edge and rises into a shallow lip, so food sits inside the tray rather than sliding over the side. Because the edge is cut rather than moulded, the profile stays crisp and the grain runs continuously around the curve, which is what separates this set from pressed board platters.
2. Three Graduated Heights
The set is built as three trays of increasing size, each raised on its own legs so the tiers step back and up. That stepped layout is the whole point of a tiered stand: the back tier stays visible when the front is loaded, and a guest can reach the top row without lifting anything off the table. Because every tray is removable, the same pieces can be used together as a display stand or separately as three serving platters.
3. A Frame Legs And Stability
Each tray sits on a pair of A frame legs cut from the same wood, splayed just enough to keep a loaded tray from tipping while staying clear of the plate beside it. The legs are fixed to the underside, so the wooden tray set needs no assembly at the venue and no tools on site. Feet are sanded smooth, so the legs do not scratch a linen cloth or a polished buffet surface.

4. Serving Capacity And Surface
The trays are sized for finger food rather than full plates: canapes and crostini on the top tier, sliced fruit in the middle and desserts below is the arrangement most caterers settle on. Because each tier is a flat routed surface with a shallow lip, cups and small bowls sit level, and the wood face can be wiped between courses. The three trays of this serving platter set carry a full dessert spread without any single tray looking crowded.
5. Party Buffet And Dessert Tables
The obvious use is a party buffet, where the three tiers replace a row of flat plates and give the table height. A display platter at each end of a long table also solves the reach problem. Wedding and event caterers use the tiered stand for dessert and canape service because it looks styled without extra props, and the warm acacia tone photographs well against white linen and floral arrangements. Because the set breaks down into three trays, transport and storage are no harder than three boards.
6. Kitchen Counter And Retail Display
At home the same display platter set works on a kitchen counter for pastries, fruit or a weekend brunch spread, and the lowest tray alone makes a practical serving board for everyday use. On a shop floor it merchandises itself: one set filled with product and one set empty to show the graduated shape reads clearly from a distance. That dual role is why the range sells to caterers, homeware retailers and gift buyers at the same time.
7. Care And Packing
The surface is sanded and sealed for food contact, so cleaning is a wipe with a damp cloth followed by air drying; the wooden tray set should not be soaked or put through a dishwasher. A light coat of food safe oil every few months keeps the brown tone even, and wiping the display platter after each event is the only routine care it needs. Cartons are built with dividers between the three tiers so the wavy rims do not knock together in transit, and custom packing artwork can be quoted with the order.
8. Custom Size And Wholesale
Tray length, the height step between tiers, rim depth and wood tone can all be adjusted, which is what makes this tiered stand workable for a private label range that needs a specific footprint. Logo engraving can go on the underside of each tray so the food face stays clean. Orders start at 500 pieces, samples are available, and the packing format is confirmed before production begins.
Specifications
Product Name |
Serving Plates |
Material |
Acacia Wood |
Colour |
Brown |
Set Contents |
3 Graduated Display Trays |
Edge |
Wavy Scalloped Rim |
Support |
Freestanding A Frame Legs |
Size |
Custom Size Accepted |
Usage |
Food Container |
Style |
Modern |
Logo |
Customized Logo Acceptable |
Packing |
Custom Packing Acceptable |
MOQ |
500 Pieces |
Key Selling Points At A Glance
Three piece acacia wood display platter set with graduated heights, A frame stand legs and a wavy scalloped edge, for presenting canapes fruit pastries and desserts on party buffets wedding tables and kitchen counters, custom size and logo accepted, carton packed for wholesale.
From elegant home decor to functional serving trays and storage, we offer tailored wooden products crafted from maple, oak, bamboo, and walnut. Advanced finishing techniques ensure premium durability and natural beauty for any scenario.
Contact us for custom wooden crafts and solutions.
Business hours: Monday to Saturday,
Open hours:8:00–18:00.