Matte Black Utensil And Jar Holder

Product Brief Description

1. Matte Black Baked Finish Over Wood

The body of this black utensil holder is built from wood panels and finished with a baked matte paint, which gives a flat, low sheen surface instead of the plastic look of moulded caddies. The paint seals the grain so splashes wipe off, and the matte tone hides fine handling marks better than gloss. Because the shape is built square from flat panels, the edges stay crisp and the box reads as part of a modern kitchen rather than a rustic accessory.

2. Two Tiers: Utensil Slots And Jar Tray

The design splits the footprint in two depths. The tall back section takes spoons, spatulas, ladles and a whisk standing upright, while the low front tray holds four small glass jars with wooden lids, at counter level where they are easy to reach. That combination is what makes it a kitchen organizer rather than a plain utensil crock: tools and ingredients sit in one piece, and nothing is hidden behind a wall of handles. Load is rated up to five kilograms across both tiers.

3. A 34.5 x 19.5 x 19.5 cm Footprint

At 34.5 by 19.5 by 19.5 cm the unit occupies about the width of a chopping board, so it fits between a hob and a sink without pushing the prep area away. The height keeps long tools stable while staying below most wall cabinets, and the flat front means the box can sit flush against a splashback. Size tolerance is plus or minus one millimetre and weight tolerance plus or minus one percent, so units ordered together line up on a run of counter.

4. Front Lettering And Branding

The front panel carries UTENSILS in an outlined serif, and that face is also the branding area: the wording can be replaced with a cafe name, a family name or a small logo, or removed for buyers who want a plain black face. Outlined lettering prints cleanly on a dark ground and stays legible in a photograph, which matters for e commerce thumbnails. Artwork is confirmed on a sample before production runs.

5. Counter And Hob Side Placement

The first use for a matte black utensil caddy is beside the hob, where the tools need to be within arm's reach and the jars need to stay out of the heat. The stepped front means a hand can reach the jar lids without lifting anything out of the back slots, and the cut out side handles let the whole unit move to the sink for a wipe down. Because the finish is dark, it suits both light marble and dark stone worktops. That is also why hotels pick the utensil holder in matte black for buffet counters.

6. Spice, Coffee And Pantry Stations

Away from the hob, the same utensil holder works on a coffee station with beans, sugar and loose tea in the jars and stirrers in the back, and on a pantry shelf holding cutlery with spice jars in front. That flexibility is why the listing covers storage rather than a single task, and why the unit sells to home cooks, rental kitchens and small cafes. The jar tray is also where the piece earns its keep in retail photography. Cafes often buy the utensil caddy in pairs for that reason.

7. Care And Retail Packaging

Cleaning the kitchen organizer is a wipe with a damp cloth; the baked finish should not be soaked or put through a dishwasher, and water should not be left standing in the jar tray. Cartons can be printed and fitted with dividers so the black faces do not scuff in transit, and the rectangular shape stacks without wasted volume for export. A printed sleeve carries care notes without adding a separate leaflet.

8. Custom Logo And Wholesale

Front lettering, logo placement, wood tone under the paint and carton artwork are all open for private label work, which is what makes this utensil holder suitable for a branded kitchen range rather than a single generic utensil holder SKU. Size and jar count can also be adjusted for a specific shelf or shipping carton. Orders start at 500 pieces, samples are available, and artwork is signed off before the run begins.

Specifications

Key Selling Points At A Glance

• Two Tier Build: tall utensil slots at the back, jar tray at the front
• Matte Black Finish: baked paint that wipes clean and hides handling marks
• Holds Up To 5 kg: rated for a full set of wooden and steel tools
• 34.5 x 19.5 x 19.5 cm: chopping board width that fits beside a hob
• Outlined Lettering: UTENSILS front panel, or your own name and logo
• Cut Out Handles: routed side openings for lifting a loaded unit
• Wholesale Ready: custom logo and carton packing from 500 pieces