Wooden Fishbone Wall Shelf

Product Brief Description

1. Four Shelves On A Fishbone

Four curved tiers run off a central spine between a fan shaped tail and a pointed head, so this wooden wall shelf reads as one drawn object rather than a stack of brackets screwed to plaster. Each shelf sits at its own height and turns slightly toward the room, which means a small plant on the second tier is still visible under the third, and nothing disappears behind the shelf above it.

2. Head, Tail And The Spine Joint

The head is cut as a wide triangle with a round hole through the middle, and the tail is carved into a fan of ribs that answers the line of the spine. Both ends are slotted onto the spine and fixed, so the joints pull tight against the wall instead of opening under load, and the whole face is sanded smooth and left in a pale natural tone that takes paint or stain if a buyer wants it changed.

3. Seventy By Twenty Three Centimetres

The piece measures 70 cm along its longest line and 23 cm from head to tail, with shelves 11 cm deep, and it weighs 1.38 kg, which two fixings will hold on most walls. That length is what makes a wooden wall shelf work above a bench, beside a door or in a narrow hall where a console table has no room. It is light enough for one person to hold in place while a second screw goes in.

4. Two Screw Buckles, No Visible Brackets

Two metal screw buckles are fixed to the back, one behind the head and one on the spine, and the shelf drops onto screws set in the wall, so nothing has to be supported while a fixing is driven. There are no brackets under the shelves and no pins through the face, which keeps the fishbone outline of this wall shelf unbroken from the room. A level, two screws and the right plugs are the whole installation kit.

5. Living Room And Entryway

In a living room it holds small plants, a candle and a few books without turning into furniture, and in an entryway it takes keys, a dish and a vase of dried stems at eye level, which is where a decorative wall shelf earns its keep. Because every tier is shallow, nothing on it blocks a walkway or catches a shoulder. It fills a strip of blank wall that a picture alone would leave empty.

6. Nursery, Bathroom And Small Rooms

The same piece works in a nursery for small toys and a night light, and in a bathroom for bottles beside a mirror, where the pale finish sits comfortably against tile. Renters buy it because two screw holes are easy to fill when they move out. In a small flat a decorative wall shelf like this stands in for a side table, and a wooden wall shelf does the same job without taking any floor area.

7. Care, Wall Type And Packing

Dust the wall shelf with a dry cloth and wipe with a barely damp one, then dry it; do not soak the shelf and keep it clear of direct steam. Check both fixings before loading a tier, and use the plug that matches the wall, whether plasterboard, brick or tile. Each unit is packed flat with corner protectors, and the buckles and screws travel in a bag taped to the spine so nothing is lost in the carton.

8. Logo, Size And Wholesale

Logos are laser engraved on the tail or on the back of the head, where a mark stays out of the styling a customer sees first. Length, shelf depth and the number of tiers can all be changed, so a custom wall shelf can be built to a shop bay or a hotel corridor. Minimum order is 500 pieces, samples take 5 to 7 days and bulk runs ship in 25 to 30 days.

Specifications

Key Selling Points At A Glance

• Four Tiers: curved shelves carried on one central spine
• Fishbone Shape: head, ribs and fan tail as one outline
• Two Buckles: screw-on fittings, no visible brackets
• 11 cm Deep: shallow enough for a hallway or a bedside
• 1.38 kg: light enough to hang on two fixings
• Pale Finish: natural tone that suits tile paint and plaster
• Wholesale Ready: engraving, length and packing from 500 pcs